Description
TACKWHITE A 33 is a pure, water borne acrylic p.s.a. It is a permanent adhesive, suitable for transparent labels, tapes and any pressure sensitive article where a good resistance to the exposure to light is required.
Application
TACKWHITE A 33 is used mainly for permanent label production (paper and film) or foams.
Technical Specifications
| Method of analysis | UoM | Standard |
|---|---|---|
| 1 Total Solids | % | 51±2 |
| 8 pH | 8 - 10 | |
| Solvents | water | |
| 3 Brookfield Viscosity 25°C | mPa.s | |
|
TACKWHITE A 33
|
200 - 500 1 | |
|
TACKWHITE A 33 (V1)
|
12000 - 22000 2 | |
| 1 No 1 RV; 20 RPM | ||
| 2 N. 5 RV; 20 RPM | ||
Film properties
| Method of analysis | UoM | Standard |
|---|---|---|
| 11 Peel Adhesion on Steel | g/in | 1,200 |
| 22 Static Shear | h | > 50 |
| 97 Loop Tack Test | g | 800 |
| Average values; 22±2 g/m² of dry adhesive on PET film 36 µm | ||
Handling
The product can be applied by traditional coating method: Mayer bar, reverse roll,... Coating weight depends on the final application, usually it is between 15 and 25 g/sqm dry.
Packaging
The product is supplied in iron drums (200 kg); IBC containers (1000 kg).
Storing
TACKWHITE A 33 must be stored at temperatures between +5°C and +40°C.
Use within 6 months from production date (unopened and in the original packaging).
Above information is reliable, but does not constitute warranty.
For the most up to date information and technical data sheets, please visit our web site: www.ichemco.it