Description
ADDITIVE ST 2X is a xylene solution additive to be added to inks before printing PP acrylic tapes or special easy- printable hot-melt and solvent borne PSA tapes.
Application
ADDITIVE ST 2X must be added to COLOR INKS PP PAMC or similar polyamidic inks for PP, in the following quantities:
50 w/w of COLOR INK PP PAMC
50 w/w of ADDITIVE ST2 X
The product must be perfectly liquid and homogeneous. It can be used also with COLOR INK PP PAM + ADD to increase the protection of the printed area from the adhesive in case of ink transfer. In this situation add 5-10% to the inks.
Technical Specifications
| Method of analysis | UoM | Standard |
|---|---|---|
| 1 Total Solids | % | 12 ± 0.5 |
| Solvents | xylene |
Handling
In case of partial or total solidification, store the product in a heated place (25-35°C) and stir it for 2-3 minutes before use. The product will return fluid. If it becomes hazy or cloudy, you can revert it to transparency by warming it at 25-35°C, while gently stirring.
Use all safety devices indicated in Material Safety Data Sheet.
Storing
ADDITIVE ST 2X must be stored at a temperature not below 18°C to prevent from freezing. Keep containers well sealed and store far from heat sources.
Use within 12 months from production date (unopened and in the original packaging).